Chris Tate Chris Tate's صفحة الملف الشخصي

Chris Tate Chris Tate

0 دورة ملتحَق بها • 0 اكتملت الدورة

سيرة شخصية

NSE8_812최신덤프데모다운덤프로Fortinet NSE 8 - Written Exam (NSE8_812)시험을패스하여자격증취득하기

요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 DumpTOP의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에Fortinet NSE8_812인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.

Fortinet NSE8_812 (Fortinet NSE 8 - Written Exam) 인증 시험은 Fortinet에서 제공하는 상급자 수준의 인증 시험입니다. 복잡한 네트워크 보안 솔루션을 설계, 구축, 관리하는 데 있는 경험이 많은 네트워크 보안 전문가들이 자신의 지식과 기술을 인증하기 위해 설계되었습니다. 이 시험은 고급 네트워크 보안 개념, 보안 프로토콜, 보안 정책, 및 위험 관리를 포함한 다양한 주제를 다루고 있습니다. 시험은 또한 후보자의 복잡한 보안 시나리오를 분석하고 적절한 보안 조치를 권장할 수 있는 능력도 테스트합니다.

>> NSE8_812최신 덤프데모 다운 <<

NSE8_812 덤프: Fortinet NSE 8 - Written Exam (NSE8_812) & NSE8_812 VCE파일

많은 사이트에서Fortinet 인증NSE8_812 인증시험대비자료를 제공하고 있습니다. 그중에서 DumpTOP를 선택한 분들은Fortinet 인증NSE8_812시험통과의 지름길에 오른것과 같습니다. DumpTOP는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서

Fortinet NSE8_812 인증 시험은 네트워크 보안 분야에서 지식과 기술을 검증하려는 전문가에게 귀중한 인증입니다. 네트워크 보안에 대한 높은 수준의 전문 지식이 필요한 것은 어려운 시험이지만 새로운 경력 기회를 열고 전문 개발에 대한 헌신을 보여줄 수 있습니다.

최신 Fortinet Network Security Expert NSE8_812 무료샘플문제 (Q14-Q19):

질문 # 14
A remote worker requests access to an SSH server inside the network. You deployed a ZTNA Rule to their FortiClient. You need to follow the security requirements to inspect this traffic.
Which two statements are true regarding the requirements? (Choose two.)

A. You need to configure a FortiClient SSL-VPN tunnel to inspect the SSH traffic.
B. FortiGate can perform SSH access proxy host-key validation.
C. Traffic is discarded as ZTNA does not support SSH connection rules
D. SSH traffic is tunneled between the client and the access proxy over HTTPS

정답：B,D

설명：
ZTNA supports SSH connection rules that allow remote workers to access SSH servers inside the network through an HTTPS tunnel between the client and the access proxy (FortiGate). The access proxy acts as an SSH client to connect to the real SSH server on behalf of the user, and performs host-key validation to verify the identity of the server. The user can use any SSH client that supports HTTPS proxy settings, such as PuTTY or OpenSSH. References: https://docs.fortinet.com/document/fortigate/7.0.0/ztna-deployment/899992/configuring-ztna-rules-to-control-access

질문 # 15
Review the VPN configuration shown in the exhibit.

What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?

A. 3 redundant packet for every 9 base packets
B. 2 redundant packet for every 8 base packets
C. 1 redundant packet for every 10 base packets
D. 3 redundant packet for every 5 base packets

정답：B

설명：
The FEC configuration in the exhibit specifies that if the packet loss is greater than 10%, then the FEC mapping will be 8 base packets and 2 redundant packets. The download bandwidth of 500 Mbps is not greater than 950 Mbps, so the FEC mapping is not overridden by the bandwidth setting. Therefore, the FEC behavior will be 2 redundant packets for every 8 base packets.
Here is the explanation of the FEC mappings in the exhibit:
Packet loss greater than 10%: 8 base packets and 2 redundant packets.
Upload bandwidth greater than 950 Mbps: 9 base packets and 3 redundant packets.
The mappings are matched from top to bottom, so the first mapping that matches the conditions will be used. In this case, the first mapping matches because the packet loss is greater than 10%. Therefore, the FEC behavior will be 2 redundant packets for every 8 base packets.

질문 # 16
You are creating the CLI script to be used on a new SD-WAN deployment You will have branches with a different number of internet connections and want to be sure there is no need to change the Performance SLA configuration in case more connections are added to the branch.
The current configuration is:

Which configuration do you use for the Performance SLA members?

A. current configuration already fulfills the requirement
B. set members any
C. set members all
D. set members 0

정답：D

설명：
References:
* Performance SLA | FortiGate / FortiOS 7.4.0
* Configuring Performance SLA | FortiGate / FortiOS 7.4.0

질문 # 17
Refer to the exhibit.

A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.
Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)

A. You can apply OSPF routing on the VDOM link in either PPP or Ethernet mode
B. Traffic on AccountVInk and SalesVInk will not be accelerated.
C. Root VDOM is an Admin type VDOM, while VDOM 1 and VDOM 2 are Traffic type VDOMs.
D. The VDOM links are in Ethernet mode because they have IP addressed assigned on both sides.
E. OSPF routing can be configured between VDOM 1 and Root VDOM without any configuration changes to AccountVInk

정답：A,B

질문 # 18
You are responsible for recommending an adapter type for NICs on a FortiGate VM that will run on an ESXi Hypervisor. Your recommendation must consider performance as the main concern, cost is not a factor.
Which adapter type for the NICs will you recommend?

A. Physical Function (PF) PCI Passthrough
B. Virtual Function (VF) PCI Passthrough
C. Native ESXi Networking with VMXNET3
D. Native ESXi Networking with E1000

정답：A

설명：
The FortiGate VM is a virtual firewall appliance that can run on various hypervisors, such as ESXi, Hyper-V, KVM, etc. The adapter type for NICs on a FortiGate VM determines the performance and compatibility of the network interface cards with the hypervisor and the physical network. There are different adapter types available for NICs on a FortiGate VM, such as E1000, VMXNET3, SR-IOV, etc. If performance is the main concern and cost is not a factor, one option is to use native ESXi networking with VMXNET3 adapter type for NICs on a FortiGate VM that will run on an ESXi hypervisor. VMXNET3 is a paravirtualized network interface card that is optimized for performance in virtual machines and supports features such as multiqueue support, Receive Side Scaling (RSS), Large Receive Offload (LRO), IPv6 offloads, and MSI/MSI-X interrupt delivery. Native ESXi networking means that the FortiGate VM uses the standard virtual switch (vSwitch) or distributed virtual switch (dvSwitch) provided by the ESXi hypervisor to connect to the physical network.
This option can provide high performance and compatibility for NICs on a FortiGate VM without requiring additional hardware or software components. References: https://docs.fortinet.com/document/fortigate/7.0.0
/vm-installation-for-vmware-esxi/19662/installing-fortigate-vm-on-vmware-esxihttps://docs.fortinet.com
/document/fortigate/7.0.0/vm-installation-for-vmware-esxi/19662/networking

질문 # 19
......

NSE8_812인증덤프샘플 다운: https://www.dumptop.com/Fortinet/NSE8_812-dump.html

Chris Tate Chris Tate

سيرة شخصية

إبدأ بالكتابة ثم اضغط زر enter للبحث